{"id":"PERTH2026-001","label":"Perth High Street pierced board","people_or_site":"75–95 High Street and 5–10 Mill Street, Perth; South Sector, Area 3, Rig V, Building 23, north room occupation floor (C2607)","country_current":"United Kingdom","historic_region":"Scotland","macroregion":"Europe / British Isles","local_name":"","source_term":"shingle (published as a roof shingle)","source_language":"English","object_description":"Catalogue 119, accession A11257: an almost complete wooden board, 175 mm by 100 mm, exceptionally thin in section, with parallel lower sides, a straight lower edge, a rounded upper end and a single round hole bored just below the top. Longitudinal cracking and small chips along the sides survive. It lay in the hard-packed floor deposit of a small wattle building, in deposits of the second half of the twelfth century. Thickness and wood species are not published. Two other pierced boards of the same family are reported separately: Coppergate, York (oak, 204 × 65 × 10 mm, 10 mm hole at the top, late twelfth to thirteenth century) and New Minster, Winchester (381 mm long, hole in the upper third, eleventh century, lost after excavation).","function_summary":"Not recorded.","attestation_type":"archaeological_find","source_key":"curteis_morris_bogdan_perth_a11257_shingle","source_type":"archaeological_report","source_url":"https://www.tafac.org.uk/wp-content/uploads/2023/09/PHSE-Fasc-2_p221-316.workedwood.pdf","page_or_plate":"Curteis, Morris and Bogdan, p. 288, Illus 194 (Cat. 119/A11257); Murray, Fascicule 1, p. 139; Morris 2000, Fig. 1168, 9054; Keene 1990, p. 322, Fig. 74, 456","map_confidence":"low_medium","plot_status":"candidate_only","coordinate_basis":"High Street, Perth, the excavated frontage of the 1975–1977 High Street excavation; a street-level anchor, not the building or floor.","jade_complex_role":"","blurb":"Wet ground under Perth's High Street kept wooden belongings that would usually have rotted or gone on the fire, and among them this board: 175 mm by 100 mm, almost complete, exceptionally thin, its upper end rounded and one clean round hole bored just below the top. It lay in the packed floor of a small wattle building of the later twelfth century, alongside pottery, bone, a piece of leather and three scraps of cloth, one of them silk. Its excavators published it as a roof shingle and added that it was rather too insubstantial to be sure. A flat blade this thin, pierced near one end for a cord, is also the shape of a bullroarer. Boards with the same drilled eye were found at Coppergate in York, an oak board 204 mm long, and at New Minster in Winchester, one 381 mm long that was lost after it was dug up.","pull_quote":"","pull_quote_translation":"","pull_quote_cite":"","term_gloss":"","cls":"unknown","class_label":"Function not recorded","color":"#6B7884","is_candidate":true,"flags":[],"f_jade_complex":false,"f_women_taboo":false,"f_women_special":false,"f_snake":false,"f_archaeology":true,"archaeology_kind":"object","date_display":"c. AD 1150–1200","date_qualification":"Second-half twelfth-century occupation floor context (B23 north room, C2607); object not directly dated. Coppergate (c. AD 1175–1300) and Winchester (c. AD 1065–1110) are separate comparators with their own contexts.","date_basis":"excavated_context","date_confidence":"medium","date_citation":"curteis_morris_bogdan_perth_a11257_shingle, Curteis, Morris and Bogdan, Perth High Street Fascicule 2 p. 288; Murray, Fascicule 1 pp. 183–185; di Folco and Hall, Fascicule 2 p. 83","sources":[{"citation":"Alice Curteis, Carole A. Morris and N. Q. Bogdan, “The worked wood,” Perth High Street Archaeological Excavation 1975–1977, Fascicule 2, p. 288, Illus 194 (Cat. 119/A11257)","url":"https://www.tafac.org.uk/wp-content/uploads/2023/09/PHSE-Fasc-2_p221-316.workedwood.pdf"},{"citation":"Hilary Murray, “The buildings,” Perth High Street Archaeological Excavation, Fascicule 1, pp. 139 and 183–185","url":"https://www.tafac.org.uk/wp-content/uploads/2023/09/Fasc-1_p129-200-6.pdf"},{"citation":"Carole A. Morris, Craft, Industry and Everyday Life: Wood and Woodworking in Anglo-Scandinavian and Medieval York, The Archaeology of York 17/13 (2000), pp. 2365–2368, 2420, Fig. 1168 (9054)","url":"https://collections.yorkarchaeologicaltrust.co.uk/files/original/74502/GB2837-PUB-AY-17-13_Wood-and-Woodworking-in-Anglo-Scandinavian-and-Medieval-York_C-A-Morris_web.pdf"},{"citation":"Derek Keene, “Shingles,” in Martin Biddle (ed.), Object and Economy in Medieval Winchester, Winchester Studies 7.2 (1990), pp. 320–326, Figs 73–75 (456)","url":"https://bcp.archaeopress.com/Archaeopress/download/9781803270227"}],"source_citations":"Alice Curteis, Carole A. Morris and N. Q. Bogdan, “The worked wood,” Perth High Street Archaeological Excavation 1975–1977, Fascicule 2, p. 288, Illus 194 (Cat. 119/A11257); Hilary Murray, “The buildings,” Perth High Street Archaeological Excavation, Fascicule 1, pp. 139 and 183–185; Carole A. Morris, Craft, Industry and Everyday Life: Wood and Woodworking in Anglo-Scandinavian and Medieval York, The Archaeology of York 17/13 (2000), pp. 2365–2368, 2420, Fig. 1168 (9054); Derek Keene, “Shingles,” in Martin Biddle (ed.), Object and Economy in Medieval Winchester, Winchester Studies 7.2 (1990), pp. 320–326, Figs 73–75 (456)","source_display":"Alice Curteis, Carole A. Morris and N. Q. Bogdan, “The worked wood,” Perth High Street Archaeological Excavation 1975–1977, Fascicule 2, p. 288, Illus 194 (Cat. 119/A11257); Hilary Murray, “The buildings,” Perth High Street Archaeological Excavation, Fascicule 1, pp. 139 and 183–185; Carole A. Morris, Craft, Industry and Everyday Life: Wood and Woodworking…","date_citation_display":"Curteis, Morris and Bogdan, Perth High Street Fascicule 2 p. 288; Murray, Fascicule 1 pp. 183–185; di Folco and Hall, Fascicule 2 p. 83","object_display":"Catalogue 119, accession A11257: an almost complete wooden board, 175 mm by 100 mm, exceptionally thin in section, with parallel lower sides, a straight lower edge, a rounded upper end and a single round hole bored just below the top. Longitudinal cracking and small chips along the sides survive. It lay in the hard-packed floor deposit of a small wattle building, in deposits of the second half of the twelfth century. Thickness and wood species are not published. Two other pierced boards of the same family are reported separately: Coppergate, York (oak, 204 × 65 × 10 mm, 10 mm hole at the top, late twelfth to thirteenth century) and New Minster, Winchester (381 mm long, hole in the upper third, eleventh century, lost after excavation).","function_display":"Not recorded.","confidence_display":"low to medium","attestation_label":"archaeological find","etymology_hedge":"","people_key":"high street","display_name":"Perth High Street pierced board","image":{"full":"assets/objects/rowing_2026_11_14/perth2026_001_a11257_illus194.jpg","thumb":"assets/objects/rowing_2026_11_14/thumbs/perth2026_001_a11257_illus194.jpg","alt":"Line drawing of a thin wooden board, square at the foot and rounded at the top, with a round hole bored just below the top; a narrow tapering section is drawn beside it and a 50 mm scale bar below.","credit":"Perth High Street Archaeological Excavation 1975–1977, fasc. 2, The wood, Illus 194 (Cat. 119, A11257)","source_page":"https://www.tafac.org.uk/wp-content/uploads/2023/09/PHSE-Fasc-2_p221-316.workedwood.pdf","representative":false,"caption":"The thin pierced board from Perth High Street, later twelfth century, drawn with its section and a 50 mm scale.","last_modified":"2026-11-14"},"slug":"perth2026-001-75-95-high-street-and-5-10-mill-street-perth-south-sector-area-3-rig-v-build"}